Weatherby Back Country S2

by
posted on October 21, 2013

In the mountains, the steep mountains where the air is thin and the footing is unsure, days can be long. They can be even longer if you’re not seeing game and you’re carrying a heavy rifle. There’s no reason for a hunting rifle to weigh more than 8 pounds in full dress. It used to be if you wanted a lightweight rifle you had to opt for open sights or a very compact scope. Weatherby said, “Not if you want to hunt with us.”

Weatherby’s Back Country rifle was made for mountain men. It has an advertised weight of 6.75 pounds so you can install a fine riflescope like a 3x-9x-40mm Trijicon Accupoint on it and still come in under 8 pounds. Just as important, these rifles are guaranteed to put three shots in a cluster measuring less than one minute of angle (MOA).

The Back Country was introduced to the Vanguard line a few years ago, and due to consumer demand Weatherby reintroduced it for 2013. The company has also made some changes consistent across the entire Vanguard line. These newer Vanguards are designated “Series 2”; in addition to the accuracy guarantee, improvements include a pillar-bedded stock design and a two-stage trigger, which is as fine a trigger as you’ll find on a factory hunting rifle. It has about an eighth of an inch of take-up and no over-travel.

Vanguards are built on actions made by Howa in Japan for Weatherby. The Howa action is essentially a copy of the excellent but discontinued Sako L61R. It has a plunger ejector like a Remington 700 and a pivoting, Sako-style extractor. The bolt release is to the left of the bolt shroud and the safety—a three-position unit—is to the right.

The Back Country comes with even more neat features like a fluted barrel, a Pachmayr Decelerator recoil pad and Cerakote finish on all exposed metalwork. Cerakote is a ceramic-based coating developed by NIC Industries. It provides excellent resistance against scratches, corrosion, cleaning solvents and chemicals.

As cool as this rifle sounds, you can make it even lighter and more user-friendly with the Weatherby Detachable Box Magazine Kit. This kit replaces the hinged floorplate with a new, polymer bottom piece that accepts a polymer, detachable magazine. The magazine holds three cartridges and has holes in the side so you can quickly see how many cartridges it contains. The installation of this kit shaves about 4 ounces off the rifle. And, by the way, when I disassembled the rifle to install it, I noticed the front recoil lug had been glass-bedded. That’s a nice touch.

If you’re looking to shave as much weight as possible, scope rings and bases matter, too. Granted, they don’t weigh a lot but some can weigh as much as a half-pound all told. Weatherby wisely went to Talley for rings and selected its one-piece mounts. Melvin Forbes of New Ultra Light Arms, arguably the king of the custom lightweight hunting rifle, originally designed these mounts and licensed the design to Talley. This is a baseless system; the two rings weigh only an ounce each.

My test rifle was a .30-06 Springfield and, with the Detachable Magazine Kit, Talley rings and Trijicon scope, it tipped the scales at 7 pounds, 4 ounces.

Weatherby’s accuracy guarantee applies only to premium ammunition. This can be a confusing label since most ammunition manufacturers consider their stuff to be “premium.” Trying to keep with the “premium” mandate, I chose three loads: Federal’s Premium 150-grain Nosler Ballistic Tip, Remington’s 150-grain Premier Accutip Boattail and Buffalo Bore’s Premium Supercharged 168-grain Barnes TTSX.

A zero was obtained in three shots, and testing started on the bench. The first few groups were not impressive but by group five they started tightening. So I stepped away from the bench and fired 40 rounds from various field-shooting positions to get a feel for the rifle and to season the barrel. My plan was to clean the barrel and conduct accuracy testing the next day.

Three things got my attention right off the bat. The exaggerated drop in the Monte Carlo-style stock amplified felt recoil from the bench. That’s a gun writer way of saying this rifle kicked. However, from unsupported positions the rifle was comfortable to shoot, which is another characteristic of the Weatherby stock. Finally, the thin barrel heated up amazingly fast; after a string of 10 shots I could not touch it.

The next day I fired five, five-shot groups with each load and used an air compressor to cool the barrel after every five-shot group. I also noted the first three shots in each group to allow an evaluation of the three-shot guarantee. Six of the 15 of those first three-shot groups measured less than 1 inch; three with the Buffalo Bore load, two with the Remington load and one with the Federal load. The average for all 15, three-shot groups was 1.064. That’s dang close.

The overall average for the 15, five-shot groups was 2.06 inches. That’s not exceptional, but based on the three-shot group average it was obvious that as the barrel quickly heated, groups opened. Keep in mind that most rifles are tested with 3-shot groups, and so this rifle shot sub-inch groups under that standard.

As far as function, reliability and general feel, the detachable box magazine performed perfectly and, if the magazine was empty you could just drop a cartridge in the ejection port and it would effortlessly chamber. This is something that is not all that common with many bolt-actions that utilize a detachable magazine. There were no malfunctions, and the rifle was very comfortable to shoot from the positions likely encountered in the field. My one complaint was recoil from the bench. That said it’s doubtful any hunter will fire 75 rounds from the bench at one sitting as I did. If that’s your plan, by a bottle of Motrin when you buy this rifle.

Bottom line, if you need a lightweight hunting rifle and do not want to pay custom prices, the Weatherby Back Country S2 is a fine choice. If it’s the choice you make, I’d suggest you opt for the Detachable Box Magazine Kit, an extra magazine and the lightweight rings. All three are available direct from Weatherby.

Weatherby Back Country S2
Type: bolt-action repeating centerfire rifle
Caliber: .240, .257, .300 Wby. Mag.; .270 Win., .30-06 (tested), .300 Win. Mag.
Barrel: 24", No. 2 contour, fluted, chrome moly
Trigger: two-stage
Magazine: internal box, drop floorplate, 3-5 rnds. capacity w/standard box, depending on cartridge, 3 w/detachable box
Sights: none; drilled and tapped for scope bases
Safety: three-position toggle
Stock: Monte Carlo; synthetic; length of pull 13 5/8"; drop at heel 1 1/4"; drop at comb 7/8"
Overall Length: 44.5"
Weight: 6.75 lbs. (6.42 lbs. w/Detachable Box Magazine Kit)
Metal Finish: Cerakote
Length: 44.5"
MSRP: $1,399; Detachable Magazine Kit $99; Vanguard lightweight scope mounts $39

Latest

001 4BBT Holster 01
001 4BBT Holster 01

4 Reasons Big-Bore Revolvers Are Still Ideal Trail Guns

Although semi-automatic pistols have a place in the trail gun line up, revolvers still have their advantages.

First Look: Rise Reliant Bolt-Action Trigger

Rise Triggers has entered the bolt-action market with its first-ever trigger for the Remington 700 platform: the Reliant Hunter and Reliant Pro triggers.

NRA Announces New Club Leadership & Development Online Course

The National Rifle Association of America is pleased to announce the release of its newly revised edition of the NRA Club Leadership & Development Online Course.

USDA Order is a Win for Wildlife

Late last month, the U.S. Department of Agriculture (USDA) issued a memorandum to conserve and restore wildlife habitat connectivity in the United States, directing agencies within the USDA to consider habitat connectivity in planning and programs in a manner that recognizes State and Tribal authorities and respects private property rights.

Review: Beretta BRX1

Beretta calls the BRX1 the fastest manually operated repeating platform on the market. Quick barrel, bolt and magazine swaps and adjustable ergonomics make it a distinct alternative to the classic turn-bolt for just about anyone, and ambidextrous controls make the rifle an attractive choice for lefties.

Are Premium Steel Waterfowl Shells Worth the Price?

With prices approaching those of bismuth—a superior shot-making material—are top-tier steel loads worth the cost? Here is what you need to know to make an informed decision.

Interests



Get the best of American Hunter delivered to your inbox.